How large a reduction in emissions would it propose, and by when?
What year would it choose as the base against which to measure progress?
How flexible would it make the regulations? Would it adopt a “mass-based” limit on total emissions or a rate-based (e.g., pounds of carbon dioxide per megawatt- hour of electricity) approach?
What role might allowance systems play in meeting the goals?
Will compliance be determined only by the actions of power companies (i.e., “inside the fence” actions) or will actions by energy consumers (“outside the fence”) be part of compliance strategies?
Would states and power companies that have already reduced GHG emissions receive credit for doing so? What about states and power generators with high levels of emissions, perhaps due to heavy reliance on coal-fired power? Would they be required to reduce emissions more than others, less than others, or the same?
EXCERPT FROM THE INTORDUCTION:
On June 2, 2014 the U.S. Environmental Protection Agency (EPA) announced its proposed performance standards for reducing carbon dioxide (CO2) emissions from existing power plants under the Clean Air Act Section 111(d).1 The proposed rule requires each state to reduce its CO2 emissions rate from existing fossil fuel plants to meet state-specific standards (in pounds per MWh) starting in 2020, with a final rate for 2030 and beyond.2 The EPA estimates that the rule will achieve a 30% reduction in CO2 emissions from the U.S. electric power sector in 2030 relative to 2005 levels. Once the rule is finalized in 2015, states will have until June 2016 to submit initial state implementation plans, to be finalized by June 2017 for stand-alone plans, and by June 2018 for multi-state plans.
EXCERPT FROM THE EXECUTIVE SUMMARY:
This Regulatory Impact Analysis (RIA) discusses potential benefits, costs, and economic impacts of the proposed Emission Guidelines for Greenhouse Gas Emissions from Existing Stationary Sources: Electric Utility Generating Units (herein referred to EGU GHG Existing Source Guidelines). This RIA also discusses the potential benefits, costs and economic impacts of the proposed Standards of Performance for Greenhouse Gas Emissions from Reconstructed and Modified Stationary Sources (EGU GHG Reconstructed and Modified Source Standards).
ES.1 Background and Context of Proposed EGU GHG Existing Source Guidelines Greenhouse gas pollution threatens Americans' health and welfare by leading to longlasting changes in our climate that can have a range of severely negative effects on human health and the environment. Carbon Dioxide (CO2) is the primary greenhouse gas pollutant, accounting for nearly three-quarters of global greenhouse gas emissions and 84 percent of U.S. greenhouse gas emissions. Fossil fuel-fired electric generating units (EGUs) are, by far, the largest emitters of GHGs, primarily in the form of CO2, among stationary sources in the U.S. In this action, the EPA is proposing emission guidelines for states to use in developing plans to address greenhouse gas emissions from existing fossil fuel-fired EGUs. Specifically, the EPA is proposing state-specific rate-based goals for carbon dioxide emissions from the power sector, as well as emission guidelines for states to use in developing plans to attain the statespecific goals. This rule, as proposed, would set in motion actions to lower the carbon dioxide emissions associated with existing power generation sources in the United States.
Taking action to address climate change by reducing U.S. emissions of greenhouse gases (GHGs) is among President Obama’s major goals. At an international conference in Copenhagen in 2009, he committed the United States to reducing emissions of greenhouse gases 17% by 2020, as compared to 2005 levels. At the time, 85 other nations also committed to reductions.
Since U.S. GHG emissions peaked in 2007, a variety of factors—some economic, some the effect of government policies at all levels—have brought the United States more than halfway to reaching the 2020 goal. Getting the rest of the way would likely depend, to some degree, on continued GHG emission reductions from electric power plants, which are the largest source of U.S. emissions.
In June 2013, the President released a Climate Action Plan that addressed this and other climate issues. At the same time, he directed the Environmental Protection Agency (EPA) to propose standards for “carbon pollution” (i.e., carbon dioxide, the principal GHG) from existing power plants by June 2014 and to finalize them in June 2015. Under the President’s timetable, by June 2016, states would be required to submit to EPA plans to implement the standards.
On June 2, 2014, EPA responded to the first of these directives by releasing the proposed standards.
The proposal relies on authority given EPA by Congress decades ago in Section 111(d) of the Clean Air Act (CAA). This section has been little used—the last use was in 1996—and never interpreted by the courts, so a number of questions have arisen regarding the extent of EPA’s authority and the mechanisms of implementation. EPA tends to refer to the regulations as “guideline documents”—although that term is not used in the statute—perhaps to indicate that the section is intended to give primary authority to the states. The proposed guideline document would set interim (2020s averages) and final (2030) emission rate goals for each state based on four “building blocks”—broad categories that describe different reduction measures; in general, however, the policies to be adopted to reach these goals would be determined by the states, not EPA.
EPA faced a number of issues in developing the proposed regulations:
• What role would there be for existing programs at the state and regional levels, such as the Regional Greenhouse Gas Initiative (RGGI), and for broader greenhouse gas reduction programs such as those implemented pursuant to California’s AB 32?
This report summarizes EPA’s proposal and answers many of these questions. In addition to discussing details of the proposed rule, the report addresses a number of questions regarding the reasons EPA is proposing this rule; EPA’s authority under Section 111 of the CAA; EPA’s previous experience using that authority; the steps the agency must take to finalize the proposed rule; and other background questions.